Wurth Bond and Seal Structural Adhesive - Grey (300ml)
If you are planning to buy bulk quantities, contact us for discounted prices as well as exclusive and priority delivery options.
0330 1281212
Wurth Bond and Seal Structural Adhesive - Grey (300ml)
Elastic PU Adhesive and Sealant for Wide Applications
Key Features:
- Universal use with outstanding adhesive strength on various materials and surfaces.
- ISEGA certificate approval for use with foodstuffs, making it safe for bonding and sealing in food processing plants.
- Harmless to humans in its hardened state.
- Highly elastic, compensates for different material expansions, dampens vibrations and noise.
- Long skin formation time allows for bonding complex components and large surfaces.
- Joint parts can be repositioned and can be sanded and painted over after skin formation.
- Non-corrosive, preventing metal corrosion.
- Low-odour and silicone-free.
Proof of Performance:
- ISEGA: Can be used where food is processed or stored, e.g., for bonding wall and floor areas in food processing companies (Clearance certificate no.: 46567 U 18).
Notable Notices:
- Not suitable for glass groove sealing or adhesive bonding on other transparent materials with UV back reflection risk.
- Exposure to direct sunlight may result in slight surface yellowing and the development of cracks.
- Not suitable for expansion joints in construction applications.
- PVC-based paints and paints drying by oxidation are not suitable for painting over the adhesive.
- Contact with solvents or solvent residues should be avoided during processing and curing.
- Risk of blister formation in the adhesive compound with high surface moisture, wide adhesive bead application, and/or cavities/air pockets.
Application Area:
- Suitable for a variety of bonding and sealing tasks.
- Specifically approved for bonding and sealing in food processing plants.
- Ideal for the permanently elastic sealing of spot weld seams.
Instructions:
- Ensure surfaces are clean, dry, and free from grease.
- Refer to the optimisation table in the technical data sheet for pre-treatment.
- Cut off the threaded spout, attach the nozzle, and cut it to the required width.
- Apply the adhesive using a suitable application gun.
- Recommend a minimum adhesive layer thickness of 3 mm for optimal thick-coat bonding.
For detailed information, refer to the provided technical data sheet.
Wurth Bond and Seal Structural Adhesive - Grey (300ml)
Elastic PU Adhesive and Sealant for Wide Applications
Key Features:
- Universal use with outstanding adhesive strength on various materials and surfaces.
- ISEGA certificate approval for use with foodstuffs, making it safe for bonding and sealing in food processing plants.
- Harmless to humans in its hardened state.
- Highly elastic, compensates for different material expansions, dampens vibrations and noise.
- Long skin formation time allows for bonding complex components and large surfaces.
- Joint parts can be repositioned and can be sanded and painted over after skin formation.
- Non-corrosive, preventing metal corrosion.
- Low-odour and silicone-free.
Proof of Performance:
- ISEGA: Can be used where food is processed or stored, e.g., for bonding wall and floor areas in food processing companies (Clearance certificate no.: 46567 U 18).
Notable Notices:
- Not suitable for glass groove sealing or adhesive bonding on other transparent materials with UV back reflection risk.
- Exposure to direct sunlight may result in slight surface yellowing and the development of cracks.
- Not suitable for expansion joints in construction applications.
- PVC-based paints and paints drying by oxidation are not suitable for painting over the adhesive.
- Contact with solvents or solvent residues should be avoided during processing and curing.
- Risk of blister formation in the adhesive compound with high surface moisture, wide adhesive bead application, and/or cavities/air pockets.
Application Area:
- Suitable for a variety of bonding and sealing tasks.
- Specifically approved for bonding and sealing in food processing plants.
- Ideal for the permanently elastic sealing of spot weld seams.
Instructions:
- Ensure surfaces are clean, dry, and free from grease.
- Refer to the optimisation table in the technical data sheet for pre-treatment.
- Cut off the threaded spout, attach the nozzle, and cut it to the required width.
- Apply the adhesive using a suitable application gun.
- Recommend a minimum adhesive layer thickness of 3 mm for optimal thick-coat bonding.
For detailed information, refer to the provided technical data sheet.
| Optimisation table | ||
| Surface/material | Optimisation steps* | Notes |
| Anodised aluminium |
1. Activating Cleaner 2. Primer for Metal |
- |
| Aluminium (AlMg3, AlMgSi1) |
1. Clean thoroughly with IPA cleaner 2. Sand lightly with "very fine" non-woven abrasive 3. Clean again with IPA cleaner 4. Activating Cleaner 5. Primer for Metal |
- |
| Non-ferrous heavy metals (brass, copper, bronze etc.) | Primer for Metal must be used! | |
| Stainless steel (rustproof) | - | |
| Steel (St 37 etc.) | For components susceptible to corrosion: 2-component PU or epoxy corrosion protection is required! | |
| Zinc-plated steel (hot-dip or conventionally galvanised) | - | |
| Zinc | - | |
| Powder coatings |
Activating Cleaner |
Preliminary testing is recommended for applications involving significant forces or a damp environment. |
| (PES, EP/PES) | ||
| 2-component top-coats, water- or solvent-based (PUR, acrylic) |
Varioprimer safe + easy |
Due to the large number of paints available, this information is only intended as a guide. Please perform preliminary tests where necessary. |
| 2-component primers, water- or solvent-based |
Varioprimer safe + easy |
- |
| (PUR, acrylic, epoxy resin) | ||
| Cathodic dip coating |
Activating Cleaner |
- |
| (E-coating) | ||
| Coil coating |
Activating Cleaner |
- |
| ABS |
1. Activating Cleaner 2. Primer for P/W/S |
The sanding process can be omitted for parts subject to low loads. |
| GFRP (unsaturated polyester), gelcoat side or SMC |
1. Clean thoroughly with IPA cleaner 2. Sand with "very fine" non-woven abrasive or grit 60-80 and then vacuum 3. Clean again with IPA cleaner 4. Activating Cleaner 5. Primer for P/W/S |
The adhesive surface must be protected against UV radiation (opaque cover). |
| Hard PVC |
1. Activating Cleaner 2. Primer for P/W/S |
- |
| PMMA/PC (without scratch-resistant coating) |
Varioprimer safe + easy |
The adhesive surface must be protected against UV radiation (opaque cover). |
| Polyamide |
Varioprimer safe + easy |
- |
| Wood, plywood, MDF, wood products and cork |
1. Remove dust 2. Primer for P/W/S |
- |
| HPL laminated panels (Resopal, Ultrapas) |
Activating Cleaner |
- |
| Glass |
Varioprimer safe + easy |
The adhesive surface must be protected against UV radiation (opaque cover). |
| Enamel, porcelain, ceramic, tiles |
1. Activating Cleaner or IPA cleaner 2. Varioprimer safe + easy |
- |
| Concrete, mineral mortar, plaster and cement fibreboards |
1. Remove dust 2. Deep-penetrating primer |
- |
| Artificial stone (Corian, Varicor) |
1. Activating Cleaner 2. Primer for P/W/S |
- |
| * Follow the appropriate sequence of individual steps | ||
|
Bond and Seal products |
B+S 0890 100 1 - 6 0890 100 111 - 3 0890 100 181 - 3 0890 100 11 + 13 |
B+S Power 0893 235 1 0893 235 2 0893 235 3 |
B+S Fast 0890 100 710 0890 100 720 0890 100 730 |
B+S Combi 0893 236 110 0893 236 120 0893 236 130 |
|
|
Metal |
Aluminium |
⎷1 |
⎷4 |
⎷1 |
⎷1 |
| Lead | x | x | x | x | |
| Stainless steel |
⎷1 |
⎷4 |
⎷1 |
⎷1 |
|
| Copper |
⎷1 |
⎷1 |
⎷1 |
⎷1 |
|
| Brass |
⎷1 |
⎷1 |
⎷1 |
⎷1 |
|
| Steel/iron |
⎷1 |
⎷4 |
⎷1 |
⎷1 |
|
| Zinc |
⎷1 |
⎷4 |
⎷1 |
⎷1 |
|
|
Plastics |
ABS |
⎷2 |
⎷2 |
⎷2 |
x |
| GFRP |
⎷2 |
⎷2 |
⎷2 |
⎷ |
|
| Rubber/neoprene | x | x | x |
⎷ |
|
| Hard foams |
⎷2 |
⎷2 |
⎷2 |
⎷ |
|
| PE | x | x | x | x | |
| PMMA |
⎷5 |
⎷5 |
⎷5 |
- | |
| Polyamide |
⎷5 |
⎷5 |
⎷5 |
⎷ |
|
| Polycarbonate = PC |
⎷5 |
⎷5 |
⎷5 |
- | |
| Expandable polystyrene (not foam!) |
⎷2 |
⎷2 |
⎷2 |
- | |
| PP | - | - | - | - | |
| PTFE | - | - | - | - | |
| Polyurethane = PU |
⎷2 |
⎷2 |
⎷2 |
⎷ |
|
| Hard PVC |
⎷2 |
⎷4 |
⎷2 |
⎷ |
|
| Silicone | - | - | - | - | |
| Expandable polystyrene | - | - | - | - | |
|
Surface must be pre-treated, please refer to the technical data sheets according to the application.
1. Prime with Primer for Metal 0890 100 61 2. Prime with Primer for P/W/S 0890 100 62 3. Pre-treat with deep-penetrating primer 0890 545 10 4. Pre-treat with Activating Cleaner 0890 100 60 5. Varioprimer safe + easy, 0890 024 021/0890 024 101 |
|||||
|
Bond and Seal products |
B+S 0890 100 1 - 6 0890 100 111 - 3 0890 100 181 - 3 0890 100 11 + 13 |
B+S Power 0893 235 1 0893 235 2 0893 235 3 |
B+S Fast 0890 100 710 0890 100 720 0890 100 730 |
B+S Combi 0893 236 110 0893 236 120 0893 236 130 |
|
|
Painted surfaces |
2-component paints, stove enamels, cathodic dip coating, painted panels |
⎷4 |
⎷4 |
⎷4 |
⎷4 |
|
Wood and engineered woods |
Wood (including MDF, chipboard) |
⎷2 |
⎷2 |
⎷2 |
⎷2 |
| Laminated panels (Resopal, Ultrapas) |
⎷4 |
⎷4 |
⎷4 |
l | |
| HPL |
⎷4 |
⎷4 |
⎷4 |
⎷4 |
|
| Decorative panels |
⎷ |
⎷ |
⎷ |
⎷ |
|
| Cork |
⎷2 |
⎷2 |
⎷2 |
⎷ |
|
|
Stone and construction materials |
Concrete |
⎷2 |
⎷2 |
⎷2 |
⎷2 |
| Bituminous substrates | - | - | - | - | |
| Aerated concrete, gypsum, plasterboard |
⎷3 |
⎷3 |
⎷3 |
⎷3 |
|
| Artificial stone (Corian, Varicor) |
⎷2 |
⎷2 |
⎷2 |
⎷ |
|
| Delicate natural stone (e.g. marble) | - | - | - | - | |
| Natural stone, brick |
⎷2 |
⎷2 |
⎷2 |
⎷2 |
|
| Cement fibreboards |
⎷3 |
⎷3 |
⎷3 |
⎷ |
|
|
Others |
Enamel |
⎷5 |
⎷4 |
⎷5 |
⎷4 |
| Glass |
⎷5 |
⎷4 |
⎷5 |
⎷4 |
|
| Fibreglass | - | - | - | - | |
| Mirrors | - | - | - | - | |
| Porcelain, ceramic, tiles |
⎷5 |
⎷4 |
⎷5 |
⎷5 |
|
| Paper |
⎷ |
⎷ |
⎷ |
⎷ |
|
| Cardboard |
⎷ |
⎷ |
⎷ |
⎷ |
|
| Fabric | - | - | - | - | |
| Leather | - | - | - | - | |
|
Surface must be pre-treated, please refer to the technical data sheets according to the application. 1. Prime with Primer for Metal 0890 100 61 2. Prime with Primer for P/W/S 0890 100 62 3. Pre-treat with deep-penetrating primer 0890 545 10 4. Pre-treat with Activating Cleaner 0890 100 60 5. Varioprimer safe + easy, 0890 024 021/0890 024 101 |
|||||
| Brand | Wurth |
|---|---|
| MPN | 08901002 |
| ean | 4011231819824 |
| Best Seller | No |
Delivery & Returns
Returns
If you wish to initiate a product return within 14 days, we gladly offer a refund as long as the item is returned in its original condition, including all packaging, tags, labels, and accessories. Kindly complete the provided return form and include it in the package you are sending back.
Please be aware that orders exceeding £100 excluding VAT are subject to a non-negotiable 40% restocking fee.
Ensure that you diligently fill out all the necessary fields on the Returns Form. It is particularly crucial to provide your customer details and order number to facilitate a prompt processing of your return; failure to include this information may result in delays in refund processing.
Delivery & Returns
Delivery Information - What does your delivery option mean?
All deliveries are subject to stock and availability.
UK Mainland
**Next Day Cut Off – subject to cleared payments and passing of payment security checks by 12pm.
Orders processed after 12pm using the next-day service option cannot be guaranteed.
All UK Mainland orders qualify for FREE when you spend £50 ex vat or more*. *Please note certain items do not qualify for free delivery.
Consignments will be delivered using DPD, Evri, and Shipley, or direct from the supplier if stock is not readily available within our warehouse.
Please note that orders placed on a Friday after 12pm for next day delivery will be dispatched on the following Monday for delivery on Tuesday.
Orders placed prior to a Bank Holiday will be delivered two days after the Bank Holiday.
|
Delivery Options - B2C |
Price (ex vat) |
Timing |
|
FREE Standard Delivery when you spend £50 ex vat or more |
£0.00 |
Monday - Friday, excluding public holidays. |
|
Standard Delivery (2-5 working days) |
£2.99 |
Monday - Friday, excluding public holidays. |
|
Express Delivery (1-3 Working Days) |
£19.99 |
Monday - Friday, excluding public holidays. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Unfortunately, We Cannot Guarantee Next Working Day - you will be notified if we can't fulfill this.
Certain items do not qualify for free delivery - this will be automatically applied at the checkout
Large heavy items may be subject to pallet charges - you will be notified by our customer care team.
Outside UK Mainland (Including Ireland)
*Please note the following postcodes are classed as Non-Mainland UK or Remote / Rural delivery: AB, IV, KW, PA, PH, HS, KA, ZE, PO30-PO41, IM, JE, GY, BT, TR21-TR25.
Regardless of the order weight and quantity, the following locations incur a carriage charge of £24.99 INC VAT
|
Delivery Options - B2B |
|
Timing |
|
FREE Delivery on any B2B order |
£0.00 |
Monday - Friday, excluding public holidays. |
|
|
|
|
Next working day delivery cut off is 1pm.
We will always try and accommodate next day delivery where we can but to guarantee next day delivery, any PO must be with Dortech before 1pm.
If you require a next day delivery but order after 1pm, a premium delivery option can be organsied through the trade sales team.
However, there is no guarantee this order will arrive the next working day. Does not apply to pallet orders.
We will deliver into branch or direct to any customer office/site address.
Europe
It is advised you arrange your own courier collection from our warehouse. If you require assistance Dortech Direct can schedule a delivery for you. Prices are dependent on box quantity and order weight. Please call our sales team for a quotation on 0330 1281212.
Please Note
- All available delivery options will be displayed at checkout/basket pages
- Working days do not include Weekends or Bank holidays
- For all enquiries ring 0330 1281212 / [email protected]
BACS & Purchase Orders
- The delivery times & dates are only valid from receipt of funds or valid PO number
Damages
By ordering with Dortech Direct you agree to inspect goods upon delivery. Damaged goods should be rejected. If you notice damage after the goods are delivered, you must report this to us within 48 hours of delivery. Dortech Direct does not accept damage liability for issues reported over 2 working days from the point of delivery.
You can report damage by sending your order details and images of any issues to [email protected]
Returns
If you need to return a product within 14 days, we are happy to refund the product provided it is returned, as sold, with all the original packaging, tags, labels and accessories.
Prior to returning any goods for any reason, please fill in the Returns Form and put it in the package that you are returning. Please note some orders are subject to up to a 35% restocking fee. This charge represents the administrative time and overheads to reprocess the stock.