Wurth Structural Adhesive Pur Rapid - Brown (310ml)
If you are planning to buy bulk quantities, contact us for discounted prices as well as exclusive and priority delivery options.
0330 1281212
Wurth Structural Adhesive Pur Rapid - Brown (310ml)
Rapid PUR Structural Adhesive for High-Strength Bonded Connections
Features:
- Proven adhesive properties.
- Tested stress group D4 in accordance with DIN EN 204 by ift Rosenheim.
- Meets the window construction requirement according to DIN EN 14257 (WATT 91).
- Adheres to a wide variety of materials.
- Can subsequently be powder-coated (200°C/30 min).
- Compatible with natural stone.
- Paste-like, thixotropic: Does not run or drip off, allowing use in vertical applications.
- Mildly foaming: Well suited for use on slightly uneven surfaces.
- High resistance (short-term against diluted acids, alkalis, and solvents).
- Can be sanded and painted over.
- Silicone- and solvent-free.
Notice:
- The viscosity of 1-C-PUR adhesives when processed at +15°C is approximately double that when used at +25°C.
- Sunlight may discolor the adhesive but does not affect the adhesive strength.
- Pressing force: ≥0.015 N/mm² for surface bonding and ≥1 N/mm² for bonding solid wood to solid wood.
- For bonding gap thicknesses ≥ 2.0 mm, bonding, pressing, and hardening times are considerably longer; bonding gap thicknesses ≥ 3 mm are not possible.
- If moisture is expected to have an impact, bonding gaps/bonding surfaces must be sealed/protected with a suitable sealing compound.
- When bonding metals to absorbent materials, ensure suitable corrosion protection for the metal surface.
- Bonded workpieces should not be coated until after the adhesive is fully hardened.
- Zinc-plated sheets should be protected against permanent moisture influence.
Application Area:
- For structural temperature- and water-resistant adhesive joints in wooden window construction, staircase construction, and wooden house door sector.
- In aluminum window and door construction for bonding aluminum corner connectors into hollow profile chambers.
Instructions:
- Ensure surfaces are clean, dry, and free of grease.
- Refer to the optimization table in the technical data sheet for pre-treatment.
- Apply adhesive to one of the bonded parts as a bead or over the whole surface using the toothed spatula.
- Adhesive application thickness should not exceed 3 mm.
- Join parts within approximately 5 minutes; the adhesive is moisture-hardening.
Wurth Structural Adhesive Pur Rapid - Brown (310ml)
Rapid PUR Structural Adhesive for High-Strength Bonded Connections
Features:
- Proven adhesive properties.
- Tested stress group D4 in accordance with DIN EN 204 by ift Rosenheim.
- Meets the window construction requirement according to DIN EN 14257 (WATT 91).
- Adheres to a wide variety of materials.
- Can subsequently be powder-coated (200°C/30 min).
- Compatible with natural stone.
- Paste-like, thixotropic: Does not run or drip off, allowing use in vertical applications.
- Mildly foaming: Well suited for use on slightly uneven surfaces.
- High resistance (short-term against diluted acids, alkalis, and solvents).
- Can be sanded and painted over.
- Silicone- and solvent-free.
Notice:
- The viscosity of 1-C-PUR adhesives when processed at +15°C is approximately double that when used at +25°C.
- Sunlight may discolor the adhesive but does not affect the adhesive strength.
- Pressing force: ≥0.015 N/mm² for surface bonding and ≥1 N/mm² for bonding solid wood to solid wood.
- For bonding gap thicknesses ≥ 2.0 mm, bonding, pressing, and hardening times are considerably longer; bonding gap thicknesses ≥ 3 mm are not possible.
- If moisture is expected to have an impact, bonding gaps/bonding surfaces must be sealed/protected with a suitable sealing compound.
- When bonding metals to absorbent materials, ensure suitable corrosion protection for the metal surface.
- Bonded workpieces should not be coated until after the adhesive is fully hardened.
- Zinc-plated sheets should be protected against permanent moisture influence.
Application Area:
- For structural temperature- and water-resistant adhesive joints in wooden window construction, staircase construction, and wooden house door sector.
- In aluminum window and door construction for bonding aluminum corner connectors into hollow profile chambers.
Instructions:
- Ensure surfaces are clean, dry, and free of grease.
- Refer to the optimization table in the technical data sheet for pre-treatment.
- Apply adhesive to one of the bonded parts as a bead or over the whole surface using the toothed spatula.
- Adhesive application thickness should not exceed 3 mm.
- Join parts within approximately 5 minutes; the adhesive is moisture-hardening.
| ASSEMBLY ADHESIVES | |||||
| Multi high-strength adhesive 0893 100 110 |
Multi-fibre adhesive 0893 100 115 |
PUR Rapid 0892 100 102 |
Assembly adhesive solvent-free 0893 100 100 |
||
| Copper |
⎷5,4,1 |
⎷5,4,1 |
⎷5,4,1 |
⎷ |
|
| Brass |
⎷5,4,1 |
⎷5,4,1 |
⎷5,4,1 |
- | |
| Steel/iron |
⎷5,4,1 |
⎷5,4,1 |
⎷5,4,1 |
⎷1 |
|
| Zinc | - |
⎷ |
⎷ |
⎷ |
|
| Plastics | ABS |
⎷4,2 |
⎷4,2 |
⎷4,2 |
⎷2 |
| GRP |
⎷5 |
⎷5 |
⎷5 |
⎷2 |
|
| Rubber/neoprene |
⎷5 |
⎷5 |
⎷5 |
- | |
| Hard foams |
⎷ |
⎷ |
⎷ |
⎷2 |
|
| PE | - | - | - | - | |
| PMMA | - | - | - |
⎷2 |
|
| Polyamide |
⎷ |
- | - | - | |
| Polycarbonate |
⎷5 |
- | - |
⎷2 |
|
| Polystyrene (not foam!) | - | - | - | - | |
| PP | - | - | - | - | |
| PTFE | - | - | - | - | |
| PVC (not soft PVC!) |
⎷6 |
⎷6 |
- |
⎷2 |
|
| Silicone | - | - | - | - | |
| Styrofoam |
⎷ |
⎷ |
⎷ |
⎷ |
|
| Painted surfaces | Painted surfaces (Two-part paints, stove enamels, cathodic dip painted panels) |
⎷5 |
⎷5 |
⎷5 |
- |
| Wood and wood materials | Wood (including MDF, chipboard) |
⎷ |
⎷ |
⎷ |
⎷ |
| HPL laminated panels (Resopal, Ultrapas) |
⎷ |
⎷ |
⎷ |
⎷ |
|
| Decorative panels |
⎷5 |
- | - |
⎷ |
|
| Cork |
⎷ |
⎷ |
⎷ |
⎷ |
|
| Stone and construction materials | Concrete |
⎷3 |
⎷3 |
⎷3 |
⎷3 |
| Bituminous surfaces | - | - | - | - | |
| Aerated concrete, gypsum, gypsum plasterboard |
⎷3 |
⎷3 |
⎷3 |
⎷3 |
|
| Synthetic stone (Corian, Varicor) |
⎷ |
⎷ |
⎷ |
⎷3 |
|
| Delicate natural stone (e.g. marble) |
⎷ |
⎷ |
⎷ |
- | |
| Stone |
⎷ |
⎷ |
⎷ |
⎷ |
|
| Cemented fibreboards |
⎷3 |
- | - |
⎷3 |
|
| Other | Enamel |
⎷5 |
⎷5 |
⎷5 |
- |
| Glass | - | - | - | - | |
| Fibreglass |
⎷ |
⎷ |
⎷ |
- | |
| Mirror | - | - | - | - | |
| Porcelain, ceramic, tiles |
⎷ |
⎷ |
⎷ |
- | |
| Paper |
⎷ |
⎷ |
⎷ |
⎷ |
|
| Cardboard |
⎷ |
⎷ |
⎷ |
⎷ |
|
| Mesh | - | - | - | - | |
| Leather |
⎷ |
⎷ |
⎷ |
- | |
| Metal | Aluminium |
⎷4,1 |
⎷4,1 |
⎷4,1 |
⎷1 |
| Lead | - | - | - | - | |
| Stainless steel |
⎷5 |
⎷5 |
⎷5 |
⎷1 |
|
| Optimisation table | ||
| Surface/material | Optimisation steps* | Notes |
| Anodised aluminium | 1. Activating Cleaner 2. AdhesionPlus metal primer |
– |
| Aluminium (AlMg3, AlMgSi1) | 1. Basic cleaning with cleaner type 60 2. Sand lightly with a very fine abrasive fleece 3. Post-cleaning with cleaner type 60 4. Activating Cleaner 5. AdhesionPlus metal primer |
– |
| Non-ferrous base metals (brass, copper, bronze etc.) | The use of AdhesionPlus metal primer is mandatory! | |
| Stainless steel (rustproof) | – | |
| Steel (St 235 etc.) | In components susceptible to corrosion: 2-component PU or epoxy corrosion protection required! | |
| Zinc-plated steel (hot-dip or galvanised) | Corrosion | |
| Zinc | Formation of white rust when moisture is present | |
| Powder coatings (PES, EP/PES) | Cleaner type 60 | Preliminary testing is recommended for applications involving significant forces or a damp environment. |
| 2-component top-coat, water- or solvent-based (PUR, acrylic) | Varioprimer safe + easy | Due to the large number of paints available, this information is only a guide. Please perform preliminary tests where necessary. |
| 2-component primers, water- or solvent-based (PUR, acrylic, epoxy resin) |
Varioprimer safe + easy | – |
| Cathodic dip coating (E-coating) |
Activating Cleaner | – |
| Coil-coat coating | Activating Cleaner | – |
| ABS | 1. Activating Cleaner 2. AdhesionPlus primer for P/W/S |
– |
| GFRP (unsaturated polyester), gelcoat side or SMC | 1. Basic cleaning with cleaner type 60 2. Sand with "very fine" or grain 60–80 abrasive fleece and then vacuum. 3. Post-cleaning with cleaner type 60 |
Adhesive surface must be protected against UV radiation (opaque cover). |
| Hard PVC | Cleaner Type 10 or Type 60 | – |
| Wood, plywood, MDF, wood products and cork | Dust removal | – |
| HPL laminated panels (Resopal, Ultrapas) | Cleaner Type 60 | – |
| Enamel, porcelain, ceramic, tiles | 1. Cleaner Type 60 2. Varioprimer safe + easy |
– |
| Concrete, mineral mortar, plaster and cement fibre board | 1. Dust removal 2. Deep-penetrating primer |
– |
| Synthetic stone (Corian, Varicor) | Cleaner Type 60 | – |
| * Follow the corresponding sequence of the individual steps | ||
| Brand | Wurth |
|---|---|
| MPN | 0892100101 |
| ean | 4045989596768 |
| Best Seller | No |
| Size | 16" |
| Silirub RAL Colour | RAL3007 Black Red |
Delivery & Returns
Returns
If you wish to initiate a product return within 14 days, we gladly offer a refund as long as the item is returned in its original condition, including all packaging, tags, labels, and accessories. Kindly complete the provided return form and include it in the package you are sending back.
Please be aware that orders exceeding £100 excluding VAT are subject to a non-negotiable 40% restocking fee.
Ensure that you diligently fill out all the necessary fields on the Returns Form. It is particularly crucial to provide your customer details and order number to facilitate a prompt processing of your return; failure to include this information may result in delays in refund processing.
Delivery & Returns
Delivery Information - What does your delivery option mean?
All deliveries are subject to stock and availability.
UK Mainland
**Next Day Cut Off – subject to cleared payments and passing of payment security checks by 12pm.
Orders processed after 12pm using the next-day service option cannot be guaranteed.
All UK Mainland orders qualify for FREE when you spend £50 ex vat or more*. *Please note certain items do not qualify for free delivery.
Consignments will be delivered using DPD, Evri, and Shipley, or direct from the supplier if stock is not readily available within our warehouse.
Please note that orders placed on a Friday after 12pm for next day delivery will be dispatched on the following Monday for delivery on Tuesday.
Orders placed prior to a Bank Holiday will be delivered two days after the Bank Holiday.
|
Delivery Options - B2C |
Price (ex vat) |
Timing |
|
FREE Standard Delivery when you spend £50 ex vat or more |
£0.00 |
Monday - Friday, excluding public holidays. |
|
Standard Delivery (2-5 working days) |
£2.99 |
Monday - Friday, excluding public holidays. |
|
Express Delivery (1-3 Working Days) |
£19.99 |
Monday - Friday, excluding public holidays. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Unfortunately, We Cannot Guarantee Next Working Day - you will be notified if we can't fulfill this.
Certain items do not qualify for free delivery - this will be automatically applied at the checkout
Large heavy items may be subject to pallet charges - you will be notified by our customer care team.
Outside UK Mainland (Including Ireland)
*Please note the following postcodes are classed as Non-Mainland UK or Remote / Rural delivery: AB, IV, KW, PA, PH, HS, KA, ZE, PO30-PO41, IM, JE, GY, BT, TR21-TR25.
Regardless of the order weight and quantity, the following locations incur a carriage charge of £24.99 INC VAT
|
Delivery Options - B2B |
|
Timing |
|
FREE Delivery on any B2B order |
£0.00 |
Monday - Friday, excluding public holidays. |
|
|
|
|
Next working day delivery cut off is 1pm.
We will always try and accommodate next day delivery where we can but to guarantee next day delivery, any PO must be with Dortech before 1pm.
If you require a next day delivery but order after 1pm, a premium delivery option can be organsied through the trade sales team.
However, there is no guarantee this order will arrive the next working day. Does not apply to pallet orders.
We will deliver into branch or direct to any customer office/site address.
Europe
It is advised you arrange your own courier collection from our warehouse. If you require assistance Dortech Direct can schedule a delivery for you. Prices are dependent on box quantity and order weight. Please call our sales team for a quotation on 0330 1281212.
Please Note
- All available delivery options will be displayed at checkout/basket pages
- Working days do not include Weekends or Bank holidays
- For all enquiries ring 0330 1281212 / [email protected]
BACS & Purchase Orders
- The delivery times & dates are only valid from receipt of funds or valid PO number
Damages
By ordering with Dortech Direct you agree to inspect goods upon delivery. Damaged goods should be rejected. If you notice damage after the goods are delivered, you must report this to us within 48 hours of delivery. Dortech Direct does not accept damage liability for issues reported over 2 working days from the point of delivery.
You can report damage by sending your order details and images of any issues to [email protected]
Returns
If you need to return a product within 14 days, we are happy to refund the product provided it is returned, as sold, with all the original packaging, tags, labels and accessories.
Prior to returning any goods for any reason, please fill in the Returns Form and put it in the package that you are returning. Please note some orders are subject to up to a 35% restocking fee. This charge represents the administrative time and overheads to reprocess the stock.